Contact Us

+6012-5144677

Email Us

enquiry@ieiautomate.com.my

waterproofing solutions

Bituminous waterproofing coating

Bituminous waterproofing coating is a type of waterproofing material that is commonly used in construction applications. It is made from a mixture of bitumen and mineral filler, such as sand or felt fibers, which is then applied to a surface to prevent water penetration. Bituminous coatings are used to protect a wide range of surfaces and structures, from foundations and roofs to tanks and pipelines.
They come in different varieties, including hot-applied, cold-applied, and self-adhesive. Hot-applied bituminous coatings are typically melted and applied to a surface in a heated form, while cold-applied coatings are applied at room temperature. Self-adhesive coatings come with a pre-applied adhesive layer, which allows for easy installation.
PRODUCTS RELATED:

ELASTOCEM 300

Elastocem 300
Highly Flexible Cementitious Waterproofing Membrane

  • For applying waterproofing to water tanks, bathrooms, balconies, swimming pools, and rooftops.
  • Suitable for applying to areas subject to high temperature changes.
  • More than 250% flexibility, bridges cracks up to 2 mm.
  • Withstands high pressure and does not leak.
  • The surface can be painted or covered with another type of waterproofing.
  • Non-toxic, can be used with drinking water tanks.
TECHNICAL INFORMATIONTEST STANDARDSTHE VALUE OBTAINED
Mixing Ratio4 : 5 ( A:B )
Density (specific gravity)ASTM D14751.5 ± 0.1 (mixed)
ElongationASTM D412250%
Tensile StrengthASTM D4121.2 N/mm2
HardnessASTM D224070 ± 5
Pot Life (working time)30 minutes @30 degrees

KRYSTAL SEAL

Krystal Seal
Crystalline Waterproofing Cement

  • Has the ability to create crystals in concrete. Protect the structure from leaks.
  • Suitable for water storage tank work. Underground structures, dams, tunnels, reservoirs, wastewater wells, elevator wells
  • Homogeneous concrete There is no problem with attrition.
  • Can bridge small cracks.
  • Can be waterproofed on both positive and negative sides.
  • Can be used either by applying it on concrete surface or sprinkling powder on fresh concrete.
  • Protects the skin and resists corrosion from chemicals.
  • Non-toxic, can be used with drinking water tanks.
TECHNICAL INFORMATIONTHE VALUE OBTAINED
Density (specific gravity)1.85 ± 0.05 (mixed)
Brush Application 
Mixing rate1 bag (20kg) per 10 liters of water
Usage rate0.5 – 0.7 kg /m2 /apply 2 layers
Curing 
can walk through12 hours
Can be buried in the ground (underground structure)36 hours
Can be activated5 days
Can be filled with water (water tank)7 days
Can be painted over28 days
Pot Life (working time)30 minutes @30 degrees

Elastocem

Elastomeric Acrylic
Waterproof Coating

Contact Us
1 Step 1
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right