Contact Us

+6012-5144677

Email Us

enquiry@ieiautomate.com.my

waterproofing solutions

Cementitious waterproofing

Cementitious waterproofing membranes are a type of coating material used to prevent water infiltration in concrete structures. The membranes are typically made from cement, sand, and special additives that improve their water-resistant properties, and are applied to the surface of the concrete.

PRODUCTS RELATED:

Cemflex-HP

Semi Flexible Cementitious Waterproofing Slurry

Cemflex-1K

One Part Cementitious Waterproofing Slurry

Cemflex-HP

CEMFLEX-HP
Semi Flexble Cementitious Waterproofing Slurry

  • Apply or plaster on concrete surfaces for waterproofing bathrooms, swimming pools, water tanks, cellars, tunnels, underground structures.
  • flexible Resistant to bending when moving. from temperature or vibration
  • High adhesion strength to the surface
  • Can be applied even on damp skin. There is no problem of falling off to can be applied even on damp surface. There is no problem of peeling off.
  • Non-toxic, can be used in drinking water tanks to non-toxic, can be used in reservoir tanks.

Cemflex-1K

CEMFLEX-1K
One Part Cementitious Waterproofing Slurry

  • Use for general waterproofing such as bathrooms, balconies, rooftops, swimming pools, fish ponds, and basements.
  • Convenient, mix with water and use immediately.
  • Safe for use with drinking water tanks.
  • Can be painted on concrete and roof tiles.

Elastocem 300


Elastocem 300
Highly Flexible Cementitious Waterproofing Membrane

  • For applying waterproofing to water tanks, bathrooms, balconies, swimming pools, and rooftops.
  • Suitable for applying to areas subject to high temperature changes.
  • More than 250% flexibility, bridges cracks up to 2 mm.
  • Withstands high pressure and does not leak.
  • The surface can be painted or covered with another type of waterproofing.
  • Non-toxic, can be used with drinking water tanks.
TECHNICAL INFORMATIONTEST STANDARDSTHE VALUE OBTAINED
Mixing Ratio4 : 5 ( A:B )
Density (specific gravity)ASTM D14751.5 ± 0.1 (mixed)
ElongationASTM D412250%
Tensile StrengthASTM D4121.2 N/mm2
HardnessASTM D224070 ± 5
Pot Life (working time)30 minutes @30 degrees

KRYSTAL SEAL

Krystal Seal
Crystalline Waterproofing Cement

  • Has the ability to create crystals in concrete. Protect the structure from leaks.
  • Suitable for water storage tank work. Underground structures, dams, tunnels, reservoirs, wastewater wells, elevator wells
  • Protects the surface
  • Can bridge small cracks.
  • Can be waterproofed on both positive and negative sides.
  • Can be used either by applying it on concrete surface or sprinkling powder on fresh concrete.
  • Protects the surface and resists corrosion from chemicals.
  • Non-toxic, can be used with drinking water tanks.
TECHNICAL INFORMATIONTHE VALUE OBTAINED
Density (specific gravity)1.85 ± 0.05 (mixed)
Brush Application 
Mixing rate1 bag (20kg) per 10 liters of water
Usage rate0.5 – 0.7 kg /m2 /apply 2 layers
Curing 
can walk through12 hours
Can be buried in the ground (underground structure)36 hours
Can be activated5 days
Can be filled with water (water tank)7 days
Can be painted over28 days
Pot Life (working time)30 minutes @30 degrees
Contact Us
1 Step 1
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right